;FLAVOR:Marlin
;TIME:991
;Filament used: 0.506207m
;Layer height: 0.2
;Generated with Cura_SteamEngine 3.6.0
M82 ;absolute extrusion mode
; See http://marlinfw.org/meta/gcode/
; TESTING ALL MACROS:
; print_time : 00:16:32
; filament_amount : [0.51]
; filament_weight : [1.5097862792968748]
; filament_cost : [0.03170551186523437]
; jobname : CE3_Mexican_Train_Player_Piece_v2
; print_bed_temperature = print_temperature = material_print_temperature
; time : 13:23:33
; date : 02-01-2019
; day : Wed
; initial_extruder_nr : 0
; ######################################################################
; acceleration_enabled : True
; acceleration_infill : 500
; acceleration_ironing : 500
; acceleration_layer_0 : 500
; acceleration_prime_tower : 500
; acceleration_print : 500
; acceleration_print_layer_0 : 500
; acceleration_roofing : 500
; acceleration_skirt_brim : 500
; acceleration_support : 500
; acceleration_support_bottom : 500
; acceleration_support_infill : 500
; acceleration_support_interface : 500
; acceleration_support_roof : 500
; acceleration_topbottom : 500
; acceleration_travel : 5000
; acceleration_travel_layer_0 : 5000.0
; acceleration_wall : 500
; acceleration_wall_0 : 500
; acceleration_wall_x : 500
; adaptive_layer_height_enabled : False
; adaptive_layer_height_threshold : 200.0
; adaptive_layer_height_variation : 0.1
; adaptive_layer_height_variation_step : 0.01
; adhesion_extruder_nr : 0
; adhesion_type : skirt
; alternate_carve_order : True
; alternate_extra_perimeter : False
; anti_overhang_mesh : False
; blackmagic : 0
; bottom_layers : 3
; bottom_skin_expand_distance : 0.8
; bottom_skin_preshrink : 0.8
; bottom_thickness : 0.6
; bridge_enable_more_layers : True
; bridge_fan_speed : 100
; bridge_fan_speed_2 : 0
; bridge_fan_speed_3 : 0
; bridge_settings_enabled : False
; bridge_skin_density : 100
; bridge_skin_density_2 : 75
; bridge_skin_density_3 : 80
; bridge_skin_material_flow : 60
; bridge_skin_material_flow_2 : 100
; bridge_skin_material_flow_3 : 110
; bridge_skin_speed : 15.0
; bridge_skin_speed_2 : 15.0
; bridge_skin_speed_3 : 15.0
; bridge_skin_support_threshold : 50
; bridge_wall_coast : 100
; bridge_wall_material_flow : 50
; bridge_wall_min_length : 5
; bridge_wall_speed : 15.0
; brim_line_count : 20
; brim_outside_only : True
; brim_replaces_support : True
; brim_width : 8.0
; carve_multiple_volumes : False
; coasting_enable : False
; coasting_min_volume : 0.8
; coasting_speed : 90
; coasting_volume : 0.064
; conical_overhang_angle : 50
; conical_overhang_enabled : False
; connect_infill_polygons : False
; connect_skin_polygons : False
; cool_fan_enabled : True
; cool_fan_full_at_height : 0.2
; cool_fan_full_layer : 2
; cool_fan_speed : 100.0
; cool_fan_speed_0 : 0
; cool_fan_speed_max : 100.0
; cool_fan_speed_min : 100.0
; cool_lift_head : False
; cool_min_layer_time : 10
; cool_min_layer_time_fan_speed_max : 10
; cool_min_speed : 10
; cooling : 0
; cross_infill_density_image : 
; cross_infill_pocket_size : 2.6666666666666665
; cross_support_density_image : 
; cutting_mesh : False
; default_material_bed_temperature : 60
; default_material_print_temperature : 200
; draft_shield_dist : 10
; draft_shield_enabled : False
; draft_shield_height : 10
; draft_shield_height_limitation : full
; dual : 0
; expand_skins_expand_distance : 0.8
; experimental : 0
; extruder_prime_pos_abs : False
; extruder_prime_pos_x : 0
; extruder_prime_pos_y : 0
; extruder_prime_pos_z : 0
; extruders_enabled_count : 1
; fill_perimeter_gaps : everywhere
; filter_out_tiny_gaps : True
; flow_rate_extrusion_offset_factor : 100
; flow_rate_max_extrusion_offset : 0
; gantry_height : 30
; gradual_infill_step_height : 1.5
; gradual_infill_steps : 0
; gradual_support_infill_step_height : 1
; gradual_support_infill_steps : 0
; infill : 0
; infill_angles : [ ]
; infill_before_walls : True
; infill_enable_travel_optimization : False
; infill_extruder_nr : -1
; infill_line_distance : 2.6666666666666665
; infill_line_width : 0.4
; infill_mesh : False
; infill_mesh_order : 0
; infill_multiplier : 1
; infill_offset_x : 0
; infill_offset_y : 0
; infill_overlap : 10
; infill_overlap_mm : 0.04
; infill_pattern : gyroid
; infill_sparse_density : 15
; infill_sparse_thickness : 0.2
; infill_support_angle : 40
; infill_support_enabled : False
; infill_wall_line_count : 0
; infill_wipe_dist : 0.1
; initial_layer_line_width_factor : 100.0
; ironing_enabled : False
; ironing_flow : 10.0
; ironing_inset : 0.2
; ironing_line_spacing : 0.1
; ironing_only_highest_layer : False
; ironing_pattern : zigzag
; jerk_enabled : True
; jerk_infill : 20
; jerk_ironing : 20
; jerk_layer_0 : 20
; jerk_prime_tower : 20
; jerk_print : 20
; jerk_print_layer_0 : 20
; jerk_roofing : 20
; jerk_skirt_brim : 20
; jerk_support : 20
; jerk_support_bottom : 20
; jerk_support_infill : 20
; jerk_support_interface : 20
; jerk_support_roof : 20
; jerk_topbottom : 20
; jerk_travel : 30
; jerk_travel_layer_0 : 30.0
; jerk_wall : 20
; jerk_wall_0 : 20
; jerk_wall_x : 20
; layer_0_z_overlap : 0.15
; layer_height : 0.2
; layer_height_0 : 0.2
; layer_start_x : 0.0
; layer_start_y : 0.0
; limit_support_retractions : True
; line_width : 0.4
; machine_acceleration : 4000
; machine_buildplate_type : glass
; machine_center_is_zero : False
; machine_depth : 235
; machine_disallowed_areas : []
; machine_end_gcode : [ YES THIS ONE WORKS ]
; machine_endstop_positive_direction_x : False
; machine_endstop_positive_direction_y : False
; machine_endstop_positive_direction_z : True
; machine_extruder_count : 1
; machine_extruder_trains : {machine_extruder_trains}
; machine_feeder_wheel_diameter : 10.0
; machine_filament_park_distance : 16
; machine_firmware_retract : False
; machine_gcode_flavor : RepRap (Marlin/Sprinter)
; machine_head_polygon : [[-30, 34], [-30, -32], [30, -32], [30, 34]]
; machine_head_with_fans_polygon : [[-20, 10], [10, 10], [10, -10], [-20, -10]]
; machine_heat_zone_length : 16
; machine_heated_bed : True
; machine_height : 250
; machine_max_acceleration_e : 10000
; machine_max_acceleration_x : 9000
; machine_max_acceleration_y : 9000
; machine_max_acceleration_z : 100
; machine_max_feedrate_e : 299792458000
; machine_max_feedrate_x : 500
; machine_max_feedrate_y : 500
; machine_max_feedrate_z : 5
; machine_max_jerk_e : 5.0
; machine_max_jerk_xy : 20.0
; machine_max_jerk_z : 0.4
; machine_min_cool_heat_time_window : 50.0
; machine_minimum_feedrate : 0.0
; machine_name : Creality Ender-3
; machine_nozzle_cool_down_speed : 2.0
; machine_nozzle_expansion_angle : 45
; machine_nozzle_head_distance : 3
; machine_nozzle_heat_up_speed : 2.0
; machine_nozzle_id : unknown
; machine_nozzle_size : 0.4
; machine_nozzle_temp_enabled : True
; machine_nozzle_tip_outer_diameter : 1
; machine_settings : 0
; machine_shape : rectangular
; machine_show_variants : False
; machine_start_gcode : [ YES THIS ONE WORKS ]
; machine_steps_per_mm_e : 1600
; machine_steps_per_mm_x : 50
; machine_steps_per_mm_y : 50
; machine_steps_per_mm_z : 50
; machine_use_extruder_offset_to_offset_coords : True
; machine_width : 235
; magic_fuzzy_skin_enabled : False
; magic_fuzzy_skin_point_density : 1.25
; magic_fuzzy_skin_point_dist : 0.8
; magic_fuzzy_skin_thickness : 0.3
; magic_mesh_surface_mode : normal
; magic_spiralize : False
; material : 0
; material_adhesion_tendency : 0
; material_bed_temp_prepend : True
; material_bed_temp_wait : True
; material_bed_temperature : 60
; material_bed_temperature_layer_0 : 60
; material_diameter : 1.75
; material_extrusion_cool_down_speed : 0.7
; material_final_print_temperature : 185
; material_flow : 100
; material_flow_dependent_temperature : False
; material_flow_layer_0 : 100
; material_flow_temp_graph : [[3.5,200],[7.0,240]]
; material_guid : 0ff92885-617b-4144-a03c-9989872454bc
; material_initial_print_temperature : 190
; material_print_temp_prepend : True
; material_print_temp_wait : True
; material_print_temperature : 200
; material_print_temperature_layer_0 : 200
; material_shrinkage_percentage : 0
; material_standby_temperature : 175
; material_surface_energy : 100
; max_feedrate_z_override : 0
; max_skin_angle_for_expansion : 90
; meshfix : 0
; meshfix_extensive_stitching : False
; meshfix_keep_open_polygons : False
; meshfix_maximum_resolution : 0.01
; meshfix_maximum_travel_resolution : 0.02
; meshfix_union_all : True
; meshfix_union_all_remove_holes : False
; metadata : {metadata}
; min_infill_area : 0
; min_skin_width_for_expansion : 3.67394039744206e-17
; minimum_polygon_circumference : 1.0
; mold_angle : 40
; mold_enabled : False
; mold_roof_height : 0.5
; mold_width : 5
; multiple_mesh_overlap : 0.15
; nozzle_disallowed_areas : []
; ooze_shield_angle : 60
; ooze_shield_dist : 2
; ooze_shield_enabled : False
; optimize_wall_printing_order : False
; outer_inset_first : False
; platform_adhesion : 0
; prime_blob_enable : True
; prime_tower_circular : True
; prime_tower_enable : False
; prime_tower_flow : 100
; prime_tower_line_width : 0.4
; prime_tower_min_volume : 6
; prime_tower_position_x : 228.4
; prime_tower_position_y : 208.4
; prime_tower_size : 20
; prime_tower_wipe_enabled : True
; print_sequence : all_at_once
; raft_acceleration : 500
; raft_airgap : 0.3
; raft_base_acceleration : 500
; raft_base_fan_speed : 0
; raft_base_jerk : 20
; raft_base_line_spacing : 1.6
; raft_base_line_width : 0.8
; raft_base_speed : 22.5
; raft_base_thickness : 0.24
; raft_fan_speed : 0
; raft_interface_acceleration : 500
; raft_interface_fan_speed : 0
; raft_interface_jerk : 20
; raft_interface_line_spacing : 1.0
; raft_interface_line_width : 0.8
; raft_interface_speed : 22.5
; raft_interface_thickness : 0.30000000000000004
; raft_jerk : 20
; raft_margin : 15
; raft_smoothing : 5
; raft_speed : 30.0
; raft_surface_acceleration : 500
; raft_surface_fan_speed : 0
; raft_surface_jerk : 20
; raft_surface_layers : 2
; raft_surface_line_spacing : 0.4
; raft_surface_line_width : 0.4
; raft_surface_speed : 30.0
; raft_surface_thickness : 0.2
; relative_extrusion : False
; remove_empty_first_layers : True
; resolution : 0
; retract_at_layer_change : False
; retraction_amount : 5
; retraction_combing : infill
; retraction_combing_max_distance : 0
; retraction_count_max : 90
; retraction_enable : True
; retraction_extra_prime_amount : 0
; retraction_extrusion_window : 5
; retraction_min_travel : 0.8
; retraction_prime_speed : 40
; retraction_retract_speed : 40
; retraction_speed : 40
; roofing_angles : [ ]
; roofing_extruder_nr : -1
; roofing_layer_count : 0
; roofing_line_width : 0.4
; roofing_pattern : lines
; settings : {settings}
; shell : 0
; skin_alternate_rotation : False
; skin_angles : [ ]
; skin_line_width : 0.4
; skin_no_small_gaps_heuristic : False
; skin_outline_count : 1
; skin_overlap : 5
; skin_overlap_mm : 0.02
; skin_preshrink : 0.8
; skirt_brim_line_width : 0.4
; skirt_brim_minimal_length : 250
; skirt_brim_speed : 30.0
; skirt_gap : 5
; skirt_line_count : 4
; slicing_tolerance : middle
; smooth_spiralized_contours : True
; spaghetti_flow : 20
; spaghetti_infill_enabled : False
; spaghetti_infill_extra_volume : 0
; spaghetti_infill_stepped : True
; spaghetti_inset : 0.2
; spaghetti_max_height : 2.0
; spaghetti_max_infill_angle : 10
; speed : 0
; speed_equalize_flow_enabled : False
; speed_equalize_flow_max : 150
; speed_infill : 60
; speed_ironing : 20.0
; speed_layer_0 : 30.0
; speed_prime_tower : 60
; speed_print : 60
; speed_print_layer_0 : 30.0
; speed_roofing : 30.0
; speed_slowdown_layers : 2
; speed_support : 60
; speed_support_bottom : 40.0
; speed_support_infill : 60
; speed_support_interface : 40.0
; speed_support_roof : 40.0
; speed_topbottom : 30.0
; speed_travel : 120
; speed_travel_layer_0 : 60.0
; speed_wall : 30.0
; speed_wall_0 : 30.0
; speed_wall_x : 60.0
; start_layers_at_same_position : False
; sub_div_rad_add : 0.4
; support : 0
; support_angle : 45
; support_bottom_density : 100
; support_bottom_distance : 0
; support_bottom_enable : False
; support_bottom_extruder_nr : 0
; support_bottom_height : 1
; support_bottom_line_distance : 0.4
; support_bottom_line_width : 0.4
; support_bottom_pattern : concentric
; support_bottom_stair_step_height : 0.3
; support_bottom_stair_step_width : 5.0
; support_brim_enable : False
; support_brim_line_count : 20
; support_brim_width : 8.0
; support_conical_angle : 30
; support_conical_enabled : False
; support_conical_min_width : 5.0
; support_connect_zigzags : True
; support_enable : True
; support_extruder_nr : 0
; support_extruder_nr_layer_0 : 0
; support_fan_enable : False
; support_infill_angle : 0
; support_infill_extruder_nr : 0
; support_infill_rate : 15
; support_infill_sparse_thickness : 0.2
; support_initial_layer_line_distance : 2.6666666666666665
; support_interface_density : 100
; support_interface_enable : False
; support_interface_extruder_nr : 0
; support_interface_height : 1
; support_interface_line_width : 0.4
; support_interface_pattern : concentric
; support_join_distance : 2.0
; support_line_distance : 2.6666666666666665
; support_line_width : 0.4
; support_mesh : False
; support_mesh_drop_down : True
; support_minimal_diameter : 3.0
; support_offset : 0.2
; support_pattern : zigzag
; support_roof_density : 100
; support_roof_enable : False
; support_roof_extruder_nr : 0
; support_roof_height : 1
; support_roof_line_distance : 0.4
; support_roof_line_width : 0.4
; support_roof_pattern : concentric
; support_skip_some_zags : False
; support_skip_zag_per_mm : 20
; support_supported_skin_fan_speed : 100
; support_top_distance : 0.1
; support_tower_diameter : 3.0
; support_tower_roof_angle : 65
; support_tree_angle : 40
; support_tree_branch_diameter : 2
; support_tree_branch_diameter_angle : 5
; support_tree_branch_distance : 1
; support_tree_collision_resolution : 0.2
; support_tree_enable : False
; support_tree_wall_count : 1
; support_tree_wall_thickness : 0.4
; support_type : buildplate
; support_use_towers : True
; support_wall_count : 0
; support_xy_distance : 0.7
; support_xy_distance_overhang : 0.2
; support_xy_overrides_z : z_overrides_xy
; support_z_distance : 0.1
; support_zag_skip_count : 8
; switch_extruder_prime_speed : 20
; switch_extruder_retraction_amount : 16
; switch_extruder_retraction_speed : 20
; switch_extruder_retraction_speeds : 20
; top_bottom_extruder_nr : -1
; top_bottom_pattern : lines
; top_bottom_pattern_0 : lines
; top_bottom_thickness : 0.6
; top_layers : 3
; top_skin_expand_distance : 0.8
; top_skin_preshrink : 0.8
; top_thickness : 0.6
; travel : 0
; travel_avoid_distance : 0.625
; travel_avoid_other_parts : True
; travel_avoid_supports : False
; travel_compensate_overlapping_walls_0_enabled : True
; travel_compensate_overlapping_walls_enabled : True
; travel_compensate_overlapping_walls_x_enabled : True
; travel_retract_before_outer_wall : False
; wall_0_extruder_nr : -1
; wall_0_inset : 0
; wall_0_wipe_dist : 0.2
; wall_extruder_nr : -1
; wall_line_count : 2
; wall_line_width : 0.4
; wall_line_width_0 : 0.4
; wall_line_width_x : 0.4
; wall_min_flow : 0
; wall_min_flow_retract : False
; wall_overhang_angle : 90
; wall_overhang_speed_factor : 100
; wall_thickness : 0.8
; wall_x_extruder_nr : -1
; wireframe_bottom_delay : 0
; wireframe_drag_along : 0.6
; wireframe_enabled : False
; wireframe_fall_down : 0.5
; wireframe_flat_delay : 0.1
; wireframe_flow : 100
; wireframe_flow_connection : 100
; wireframe_flow_flat : 100
; wireframe_height : 3
; wireframe_nozzle_clearance : 1
; wireframe_printspeed : 5
; wireframe_printspeed_bottom : 5
; wireframe_printspeed_down : 5
; wireframe_printspeed_flat : 5
; wireframe_printspeed_up : 5
; wireframe_roof_drag_along : 0.8
; wireframe_roof_fall_down : 2
; wireframe_roof_inset : 3
; wireframe_roof_outer_delay : 0.2
; wireframe_straight_before_down : 20
; wireframe_strategy : compensate
; wireframe_top_delay : 0
; wireframe_top_jump : 0.6
; wireframe_up_half_speed : 0.3
; xy_offset : 0
; xy_offset_layer_0 : 0
; z_seam_corner : z_seam_corner_inner
; z_seam_relative : False
; z_seam_type : sharpest_corner
; z_seam_x : 117.5
; z_seam_y : 705
; zig_zaggify_infill : False
; zig_zaggify_support : False
; ######################################################################
;Sliced at: Wed 02-01-2019 13:23:33
;Basic settings: Layer height: 0.2 Walls: 0.8 Fill: 15
;Print time: 00:16:32
;Filament used: [0.51]m [1.5097862792968748]g
;Filament cost: [0.03170551186523437]
;
; End of custom start GCode

G92 E0
G1 F2400 E-5
;LAYER_COUNT:83
;LAYER:0
M107
M204 S5000
M205 X30 Y30
G0 F3600 X108.276 Y104.274 Z0.2
M204 S500
M205 X20 Y20
;TYPE:SKIRT
G1 F2400 E0
G1 F1800 X108.787 Y103.777 E0.02371
; [ ETC ETC ETC ]
;TYPE:SUPPORT
G1 F300 Z0.2
G1 F2400 E12.92279
G1 F1800 X113.758 Y108.187 E12.94592
; [ ETC ETC ETC ]
G1 F300 Z1.2
;MESH:Mexican_Train_Player_Piece_v2.stl
G0 F3600 X122.666 Y113.138 Z1.2
M204 S500
M205 X20 Y20
;TYPE:WALL-INNER
G1 F300 Z0.2
G1 F2400 E19.23418
G1 F1800 X112.465 Y113.139 E19.57347
; [ ETC ETC ETC ]
;TYPE:WALL-OUTER
G1 F1800 X123.066 Y113.538 E19.86319
; [ ETC ETC ETC ]
;TYPE:WALL-INNER
G1 F300 Z0.2
; [ ETC ETC ETC ]
;TYPE:WALL-OUTER
G1 F1800 X112.265 Y123.339 E21.5918
; [ ETC ETC ETC ]
G1 F300 Z1.2
;MESH:NONMESH
G0 F3600 X114.675 Y107.73 Z1.2
;TIME_ELAPSED:46.715788
;LAYER:1
M140 S60
M106 S255
G0 F5400 X114.675 Y107.73 Z1.4
M204 S500
M205 X20 Y20
;TYPE:SUPPORT
G1 F300 Z0.4
G1 F2400 E22.03414
G1 F2403 X114.357 Y107.854 E22.04549
; [ ETC ETC ETC ]
G1 F300 Z1.4
;MESH:Mexican_Train_Player_Piece_v2.stl
G0 F5400 X122.666 Y113.675 Z1.4
M204 S500
M205 X20 Y20
;TYPE:WALL-INNER
G1 F300 Z0.4
G1 F2400 E25.93542
G1 F2403 X112.665 Y113.676 E26.26805
; [ ETC ETC ETC ]
;TYPE:WALL-OUTER
G1 F1602 X112.265 Y114.076 E27.06126
; [ ETC ETC ETC ]
;TYPE:SKIN
G1 F300 Z0.4
; [ ETC ETC ETC ]
;TYPE:WALL-INNER
G1 F300 Z0.4
G1 F2400 E28.40482
; [ ETC ETC ETC ]
;TYPE:WALL-OUTER
G1 F1602 X112.265 Y123.876 E29.53066
; [ ETC ETC ETC ]
;TYPE:SKIN
G1 F300 Z0.4
G1 F2400 E30.04445
; [ ETC ETC ETC ]
G1 F2400 E25.87533
G1 F300 Z1.4
;MESH:NONMESH
G0 F5400 X114.675 Y107.73 Z1.4
;TIME_ELAPSED:65.204136
;LAYER:2
G0 F7200 X114.675 Y107.73 Z1.6
M204 S500
M205 X20 Y20
;TYPE:SUPPORT
G1 F300 Z0.6
; [ ETC ETC ETC ]
;MESH:Mexican_Train_Player_Piece_v2.stl
G0 F7200 X122.666 Y114.027 Z1.6
M204 S500
M205 X20 Y20
;TYPE:WALL-INNER
G1 F300 Z0.6
; [ ETC ETC ETC ]
;TYPE:WALL-OUTER
G1 F1613.3 X112.065 Y114.427 E35.70802
;TYPE:SKIN
G1 F300 Z0.6
G1 F2400 E36.2643
; [ ETC ETC ETC ]
G1 F300 Z1.6
G0 F7200 X122.666 Y123.827 Z1.6
M204 S500
M205 X20 Y20
;TYPE:WALL-INNER
G1 F300 Z0.6
G1 F2400 E37.66999
; [ ETC ETC ETC ]
M204 S500
M205 X20 Y20
;TYPE:WALL-OUTER
; [ ETC ETC ETC ]
G1 F2400 E49.8484
G1 F300 Z2
;MESH:Mexican_Train_Player_Piece_v2.stl
G0 F7200 X113.659 Y114.309 Z2
M204 S500
M205 X20 Y20
;TYPE:FILL
G1 F300 Z1
G1 F2400 E54.8484
; [ ETC ETC ETC ]
;MESH:NONMESH
G0 F7200 X113.567 Y121.706 Z2.2
G0 X114.675 Y107.73
;TIME_ELAPSED:138.355685
;LAYER:6
G0 X114.675 Y107.73 Z2.4
M204 S500
M205 X20 Y20
;TYPE:SUPPORT
G1 F300 Z1.4
G1 F2400 E66.48509
; [ ETC ETC ETC ]
;TYPE:SKIN
G1 F600 X118.067 Y110.886 E505.17806
; [ ETC ETC ETC ]
;TIME_ELAPSED:991.844970
G1 F2400 E501.20662
M140 S0
M204 S4000
M107
; Ender 3 Custom End G-code
M117 Finishing...
; [ ETC ETC ETC ]
M117 Done!
; End of custom end GCode
M82 ;absolute extrusion mode
M104 S0
;End of Gcode
;SETTING_3 {"global_quality": "[general]\\nversion = 4\\nname = NN-Gyroid15\\nde
;SETTING_3 finition = fdmprinter\\n\\n[metadata]\\nquality_type = draft\\nsettin
;SETTING_3 g_version = 5\\ntype = quality_changes\\n\\n[values]\\nretraction_com
;SETTING_3 bing = infill\\nsupport_enable = True\\nsupport_type = buildplate\\n\
;SETTING_3 \n", "extruder_quality": ["[general]\\nversion = 4\\nname = NN-Gyroid
;SETTING_3 15\\ndefinition = fdmprinter\\n\\n[metadata]\\nquality_type = draft\\
;SETTING_3 nsetting_version = 5\\ntype = quality_changes\\nposition = 0\\n\\n[va
;SETTING_3 lues]\\ninfill_pattern = gyroid\\ninfill_sparse_density = 15\\nretrac
;SETTING_3 tion_hop_enabled = True\\nsupport_angle = 45\\n\\n"]}